Folks,
The Cemu board as published needs a code revision and 2 mod wires to work. Took quite a bit of head scratching to figure out the issues. Mode wire #1 - the 5V regulator is not grounded. Mod wire #2 - one of the audio paths is not connected to the 3.5mm plug. Code change - the ec_tx and ec_rx are swapped.
Will post new code and board/eagle files this week. With that said, it is working like a charm now.
doh... ;>)
ReplyDeletePart of building hardware/software.. Never goes 100% the first time.
ReplyDelete